My shopping cart
Your cart is currently empty.
Continue Shopping
Free Shipping Anywhere in Canada. |
Free Pickups At our Toronto location. *Subject to available inventory. Please contact us to schedule |
Return new products within 30 days of purchase for a full refund - no restocking fees. |
---|
Programmable Dual Motor Electric Standing Desk
What is the weight capacity of the desk?
Our Programmable Dual Motor standing desk can lift up to 300 lbs.
I can't find the assembly instructions, where can I get them?
You can find them here: AnthroDesk Dual Motor Desk Assembly Guide (PDF)
How do I install an AnthroDesk tabletop?
Please note our desk table tops do not have pre-drilled holes. This allows for custom positioning of the top on the frame and in addition of accessories like CPU holders, etc (also, the laminate tabletops are reversible, so holes can't be made until you first decide what side you want to use). As such, a drill will be needed to install the tabletop. After you position the top on the standing desk frame (normally centred), use the wood screws included to attach the desktop to all four corners. Some standing desk models will also have brackets on the central crossbar that can be used for additional support (optional).
Click the link to see a video showing tabletop installation: https://www.youtube.com/watch?v=u4LyjNZYs94
Please note that the installation instructions above are only applicable to AnthroDesk tabletops purchased from our website. Other table tops may be used, but installation instructions may vary.
How fast do the Dual Motor Standing Desks move up and down?
They move approximately 2.75cm / 1" a second up OR down. Moving from the lowest position to the highest is approximately 17 seconds.
What type of shoes should I wear with a standing desk?
We have seen people wear all types of shoes, however ideally you should wear shoes that have little or no heel and are naturally comfortable with little pressure on any part of the foot. If you are not used to standing for prolonged periods, we also recommend an anti-fatigue mat such as this one, which can be used with or without shoes (which may be the best option of all!)
Is the desk difficult to assemble?
No! Most people assemble the desks in under an hour (and handyman types can typically assemble the frame in less than 20 minutes). The best time we've heard for assembling the Electric Standing Desk was 10 minutes - let us know if you did it in less time!
How do I install the tabletop/desktop?
After you position the top on the standing desk frame (our default recommendation is to center it on the frame), use the wood screws included to attach the desk top on all four corners. Some adjustable desk frames will also have brackets on the central crossbar that can be used for additional support (optional).
Is the Dual Motor Electric Standing Desk Loud?
Not very loud. Our desk is quieter than any of the single-motor designs. The dual motors of our sit-stand desk are located in each leg column, which provides some baffling against noise. Also, since there are two motors, they don't have to work as hard (or as loudly) to move the desk up or down.
What height should I use for my standing desk?
This is a decision of personal preference and body type. However as a VERY general guide, see the following body heights and corresponding maximum desk heights below (and remember if you buy a frame without a tabletop, the desk table top will add to the height)
Who can I call for support?
You can call us at 1-800-267-1783 for any additional questions you have
My desk seems to wobble a bit. What can I do?
There are a few reasons why your desk may wobble a little more than expected. Some slight movement is normal but nothing that would be distracting or cause concern for monitors or anything else on your desk. Reasons why your desk may be wobbling:
I put together my desk just one day ago, and it has turned out to meet all of my expectations. The assembly process was effortless, and while it's a bit on the heavier side as anticipated, it hasn't posed any issues. It's worth noting the weight, though. I'm really fond of its appearance, and its performance is excellent. Notably, the motor runs quietly, which is a definite plus.
Comfortable My Programmable Dual Motor Electric Standing Desk has completely transformed my workday. The desk is easy to use, and the ability to program different heights has made it incredibly easy to switch between sitting and standing throughout the day. I feel so much better after using this desk regularly.
The dual motor system is a tank, it can handle lots of weight. It's easy to use and adjust and does the job!
First of all, thank you to Anthrodesk for having such wonderful customer service! My order was delayed but I received frequent updates from the customer service team, and even an upgrade on an item that went out of stock right after I placed the order.
The desk does require 2 people to setup as it's quite heavy, but certainly worth it as it seems very sturdy with very minimal wobble at top height, and the dual motor is quiet.
Love my standing desk! The perfect home office upgrade.
I purchased this desk with 60x30 Solid Wood Walnut table-top. The delivery was done in the same week and after I set up the table in the weekend, I'm very happy with it. I used to have a standing desk in my office and with us working at home, so I can compare this table with what I used to have.
I'm very happy with the quality of the table and frame. They're of very high quality and the advantage of not having pre-drilled holes is that you can move the frame either (almost) to the end or keep them a little inside - depending on your preference and any attachments you may want to attach to the table (e.g. monitor mounts).
Carrying the table to the 2nd floor was a bit of a workout as both the frame and table-top are very heavy. Assembly is easy, but you'll need a good area as you'll need to put the table-top flat and put the frame on top of it to drill the provided screws, and then flipping it (to make it upright) will need another person's help.
It's too soon to say anything about the motor but so far (in 1-week usage), I'm pretty happy with it. I've two big monitors (with mounts) on it + 1 laptop + other stuff and it's very stable when either raising it or lowering it. It can easily carry more weight.
I'm still playing with the anti-collision feature (as mentioned in the manual - though it could be me not trying it properly), which doesn't seem to be working, but the support staff is very helpful in getting me to figure out this stuff.
Awesome table for the price (in Canada). Highly recommended.
© 2024 AnthroDesk |